Pencil extension cradle — PencilReach | JLF-336

COLOR: BLACK. The supplied print is black; render colors are illustrative. Extend the grip of a short pencil using a removable clamp bar. DIMENSIONS 8 mm diameter open channel, two M3 holes 27 mm apart; 152 mm body. CONTENTS 2 printed pieces: 1 × pencil extension body; 1 × pencil clamp. Material: PETG. SUPPLY SEPARATELY Two M3×18 socket button-head screws ISO 7380-1 (nominal head Ø5.7 × 1.65 mm), two M3 washers (0.5 mm thick), two M3 hex nuts (5.5 mm across flats, 2.4 mm thick), 2 mm hex key, compatible pencil. USE AND ASSEMBLY Place a round 7–7.5 mm pencil in the channel. Align clamp holes to body at x=8 mm, y=36/63 mm, and insert M3×18 screws from below with heads inside the circular recesses; fit washers and nuts on top of the clamp and tighten lightly. Keep pencil protruding beyond the end. Images are renders of the actual CAD. Geometry and reference slicing checked digitally; physical fit, finish and service life have not been established by those checks. Printed to order. Shipping and taxes are calculated at checkout. Design: João Lutz / JoaoLutzFilm, with AI assistance.