Holder and tray for a 58mm bottomless portafilter, made for the classic Eureka Mignon Specialità grinder. The portafilter rests on the raised stand with its basket held by a low rim, so you can grind hands-free. The tray catches stray grounds. Two small T-shaped tabs at the back slide into the bottom of the grinder and keep the holder in place; it can slide slightly forward and back so the portafilter can press the grinder's start button. Compatibility: • Designed for the classic Eureka Mignon Specialità • Designed around a 58mm bottomless portafilter • Not intended for the Specialità SMART, Mignon Up, Mignon Compatto or other models with a different base or fork • Portafilter shapes vary between brands. Please check your grinder model and portafilter before ordering. Fitting: • Slide the rear tabs under the front of the grinder until the T-shaped tabs drop into place. • The tabs are a snug fit by design. If they are too tight on your grinder, sand them lightly. Product details: • Quantity: 1 holder/tray • Material: PLA • Color: Matte Black • Approx. size: 120 × 145 × 87 mm • Hollow underside to save weight • 3D printed on demand Images are computer renderings (CG). Aftermarket part, not made by or affiliated with Eureka.