End Cap Right for Thule Omnistor 5002 Awning Flap Type Compatible Replacement

Replacement right-hand end cap (cassette end cover) for Thule Omnistor 5002 awnings - the version with the extended top flap. - Fits: Thule Omnistor 5002, right-hand side (the side without the crank), flap version (often called V05; fitted from about 2005/2006 - sources differ on the exact year, so please compare with your old cap). Position of part no. 55 4412 00. Not for the left-hand side and not for the earlier cap without the flap (about 60 mm deep instead of 90 mm). - Size: approx. 140 x 87 x 90 mm (5.5 x 3.4 x 3.5 in), including the flap. - Material and colour: PETG, white - tougher and more heat- and weather-resistant than standard PLA. 3D printed, fine layer lines are visible. - Design: the inside (cassette fit, four snap catches, screw boss) is modelled on a cap design that has been fitted on this awning; the outside is our own design with thicker walls (about 2 mm), a flat end face with a double pinline and two pinstripe grooves around the sides. - Installation: slides onto the end of the awning cassette and clips in with the catches under the rim; secure it with the fixing screw from your old cap (screw not included). - Please check before you buy: hold your old cap next to the photos - the flap on top, the overall depth of about 90 mm and the screw position should match. - This is a cosmetic/protective end cover. It does not hold the awning spring or any moving part. - Pack: 1 end cap. - Rendered images are computer graphics, not photos. Aftermarket part. Not made by, endorsed by, or affiliated with Thule.