Wire buttoning loop handle and clamp — ButtonHook | JLF-441

COLOR: BLACK. The supplied print is black; render colors are illustrative. Give a wire buttoning loop a broad hand grip for occasional dressing use. DIMENSIONS 75 × 26 mm handle with two Ø1.6 mm wire holes and screw-down end clamp. CONTENTS 2 printed pieces: 1 × wire loop handle; 1 × wire end clamp. Material: PETG. SUPPLY SEPARATELY Smooth 1.2 mm wire; two M3 × 12 bolts and M3 nuts. User must form and inspect the wire loop; no medical-performance claim. USE AND ASSEMBLY Bend and deburr a smooth 1.2 mm wire loop, feed ends through the handle passages and under the clamp. Insert M3 nuts into underside recesses. Tighten M3 × 12 bolts gently; the clamp rests on the wires, slightly above the recess floor. Check loop retention and enclosed ends before touching fabric. Images are renders of the actual CAD. Geometry and reference slicing checked digitally; physical fit, finish and service life have not been established by those checks. Printed to order. Shipping and taxes are calculated at checkout. Design: João Lutz / JoaoLutzFilm, with AI assistance.