Magazine Back Terminal Cap for Nikon MD-4 Motor Drive (Nikon F3) - M11 x 0.5 Screw-In Cover, Replacement / Compatible, Black, 1 pc

Replacement screw-in cap for the Magazine Back terminal of the Nikon MD-4 motor drive (the motor drive for the Nikon F3 series). Keeps dust and grit out of the terminal when it is not in use. - Thread: M11 x 0.5 (the Magazine Back terminal). It does NOT fit the Remote terminal (M9 x 0.5) or the External Power terminal (M7 x 0.5) of the MD-4. - Size: 12.7 mm diameter head, about 4.8 mm overall height. - Material: PETG, black. 3D printed (FDM), so fine layer lines are visible. - Grip: fluted edge for turning by hand. - Fitting: screw in gently by hand until the cap seats. Do not use tools or overtighten; the thread is fine and printed in plastic. The first time it may feel snug. Please check that your terminal is the Magazine Back terminal (the largest of the three threaded terminals) before ordering. Aftermarket part, not made by or affiliated with Nikon. Grip head and outer face: our own design. The threaded spigot (M11 x 0.5 thread and bore) is from "Nikon F3 MD-4 Motor Drive Terminal Cap Covers" by notyahc67 (printables.com/model/1342139, CC BY-SA 4.0), combined with our own head. Not endorsed by notyahc67. Images are computer renderings (CG), not photos of the printed part.

Magazine Back Terminal Cap for Nikon MD-4 Motor Drive (Nikon F3) - M11 x 0.5 Screw-In Cover, Replacement / Compatible, Black, 1 pc