ControlFix 3G Adaptable Decora Mounting Bracket - 4.2mm Holes For M3 Heat Set Inserts

A direct cavity mount for NEMA WD-6 / Decora-format control panels and keypads. No back box, no external hardware - the panel itself clamps the frame in place once installed. This design uses the same clip-and-flange fixing principle as our ControlFix range: a rear flange bears against the back of the wall surface, holding the frame in position while the panel is fitted. Base configuration is 3-gang. Notched break points let you trim it down to function as 2-gang or 1-gang, and multiple frames can be placed side by side to cover configurations up to 6-gang - each frame is a standalone single-piece unit, with no connecting hardware between them. We designed this as part of exploring where ControlFix's mounting approach could go next. It's released here as a free, open design rather than a 730design product line. Who it's for Built for the multi-gang control positions common across custom integration and architectural control systems. Compatible with: Control4 - Decora Wired Keypad Crestron - Cameo, Horizon, and custom keypad lines built to standard US box spacing Lutron - Claro, Caseta, RA2 Select, and RadioRA 3 companion dimmers Savant - Echo and Metropolitan low-voltage keypads (WPK/WIK series) Also compatible with other systems built to the standard 46.02mm NEMA WD-6 module spacing, including ETC Unison Echo Inspire and RTI in-wall keypads. Decora is a North American faceplate standard, distinct from the AU, UK/Type 86, and EU DIN conventions the rest of the 730design range is built to - see our wall box standards reference for how these regional standards compare. Specifications Frame depth: 10mm Rear flange: 10mm wide x 1.8mm thick Internal corners filleted to reduce stress at the flange-to-frame junction Three fixing variants included in the download: a self-tap variant for a 6g screw, a through-hole variant sized for an M3 brass embedded thread, and a through-hole variant sized for a 6-32 UNC brass embedded thread