Belt Clip for Uniden Bearcat BC125AT Scanner, Screw-On Replacement Clip, 3D Printed PETG, Aftermarket

Replacement screw-on belt clip for the Uniden Bearcat BC125AT handheld scanner. Fits: Uniden Bearcat BC125AT with the screw-on clip (two screws, 16 mm apart). Not for slide-on clip systems such as the SDS100. Users of the base design also report a fit on the BCD325P2, UBC120XLT and UBC61XLT. We have not checked those models ourselves - please compare the screw spacing (16 mm between the two holes) and your old clip before ordering. Material: PETG, black, 3D printed. PETG is tougher and flexes better than PLA, which suits a spring clip. Mounting: reuse the two screws from your old clip (screws are not included). Holes 3.5 mm, screw-head pocket 8 mm wide. Size: about 65 x 31 x 8 mm. Design: flat tip with grip grooves for pulling the clip off the belt, chamfered edges, a raised shoulder where the arm meets the base, and a countersunk screw pocket. Please check the model number of your scanner before you buy. 3D printed parts show fine layer lines. Small marks from print supports may be visible on one long edge. Aftermarket part, not made by or affiliated with Uniden. Outer shape, reinforced arm root and grip grooves: our own design. The mounting base, screw holes and belt gap follow "Uniden Bearcat BC125AT radio scanner belt hook" by nickboers (thingiverse.com/thing:3925334, CC BY), re-modelled by us. Not endorsed by nickboers.