Vented small electronics project box — ProjectShell | JLF-402

COLOR: BLACK. The supplied print is black; render colors are illustrative. Enclose a low-voltage hobby module with removable vented cover. DIMENSIONS 96 × 66 mm nominal inner wall rectangle, 30 mm depth, reduced by four 14 × 14 mm corner posts. Measure your module between posts. CONTENTS 2 printed pieces: 1 × low voltage project box; 1 × vented screw lid. Material: PETG. SUPPLY SEPARATELY Four M3 × 12 bolts/nuts; appropriate standoffs and cable grommets for your project. USE AND ASSEMBLY Slide four M3 nuts into the side-entry pockets, place a module on separate insulating standoffs and attach lid with M3 × 12 bolts. Project-specific cable openings and grommets are not supplied; any needed modifications are the buyer’s responsibility. Do not house mains or hot electronics. Images are renders of the actual CAD. Geometry and reference slicing checked digitally; physical fit, finish and service life have not been established by those checks. Printed to order. Shipping and taxes are calculated at checkout. Design: João Lutz / JoaoLutzFilm, with AI assistance.