Polar Scope Cover for Sky-Watcher Star Adventurer GTi - 2-Pack Replacement Cap, Compatible Aftermarket Part, 3D Printed Black

Replacement polar scope cover for the Sky-Watcher Star Adventurer GTi mount. The pack contains 2 covers: one to use and one spare for your kit bag. The cover slides over the rear end of the mount around the polar scope opening. Two side tabs locate in the holes of the mount and a clip on the flat side hooks under the lip of the mount, so the cover is held in place instead of just being pushed on. WHAT'S INCLUDED - 2 identical polar scope covers - Material / colour: PETG, black - Size per cover: approx. 64 x 53 x 53 mm (2.52 x 2.07 x 2.07 in) FITTING Push the cover straight onto the rear of the mount until both side tabs sit in the holes and the clip snaps over the lip. To remove it, lift the clip slightly and pull the cover straight off. COMPATIBILITY Made for the Sky-Watcher Star Adventurer GTi. Fit on the Star Adventurer 2i, the original Star Adventurer, the AZ-GTi or other mounts has not been checked. Please check the model of your mount before ordering. Physical fit is not tested on every print. PLEASE NOTE 3D printed to order, so fine layer lines are visible. Product images are computer renderings. The mount and polar scope are not included. Aftermarket part, not made by or affiliated with Sky-Watcher.

Polar Scope Cover for Sky-Watcher Star Adventurer GTi - 2-Pack Replacement Cap, Compatible Aftermarket Part, 3D Printed Black