Flat hand sanding block — SandClamp | JLF-315

COLOR: BLACK. The supplied print is black; render colors are illustrative. Clamp a strip of abrasive paper over a flat backing. DIMENSIONS 112 × 56 × 18 mm body; two 7 mm end clamp bars; M3 clearance holes and underside nut recesses. CONTENTS 3 printed pieces: 1 × flat sanding body; 2 × end clamp. Material: PETG. SUPPLY SEPARATELY Two M3×25 pan-head screws, two M3 hex nuts, sandpaper and screwdriver. USE AND ASSEMBLY Wrap sandpaper across the underside and over both ends. Seat M3 nuts below, place bars on top and tighten M3×25 screws gently. Seat each nut against its recess ceiling and verify that neither nuts nor screw tips protrude below the sanding face. Hand sanding only. Images are renders of the actual CAD. Geometry and reference slicing checked digitally; physical fit, finish and service life have not been established by those checks. Printed to order. Shipping and taxes are calculated at checkout. Design: João Lutz / JoaoLutzFilm, with AI assistance.