Finger Grip for Nikon FA Film Camera, Replacement Hand Grip, PETG, M3 Screw Req.

Finger grip for the Nikon FA 35mm film SLR. A small add-on grip for the front of the Nikon FA, for bodies that are missing the detachable hand grip (for example, bodies that were sold with a motor drive instead). It gives your fingers a better hold on the flat camera body. Compatibility - Made for the Nikon FA only. It fits the FA's grip mount on the front of the body: a mounting stud and a threaded screw hole. - Fit on other Nikon bodies (FE, FM, FG and others) has not been confirmed. - Please check that your FA has the mounting stud and the screw hole before ordering. What you get - 1 x finger grip, 3D printed in PETG (black) - The screw is NOT included. You need one M3 x 10 mm screw (socket head or pan head). Installation 1. Remove any leftover support material from the keyhole slot and from the screw recess. 2. Put the grip on the camera with the wide end of the keyhole slot over the mounting stud. 3. Slide the grip until the stud stops at the closed end of the narrow slot. The first fit can be snug. 4. Fasten it with an M3 x 10 mm screw through the hole in the grip. Do not overtighten. Details - Size: approx. 51 x 20 x 11 mm - Material: PETG - Made to order by 3D printing (FDM). Layer lines are visible; small surface marks are normal. - Pictures are CG renderings, not photos. Aftermarket part, not made by or affiliated with Nikon.