Replacement Spring Feet for Marantz 6350 Turntable, Set of 2 - Housing + Bushing, 3D Printed PETG, Aftermarket (Reuse Original Springs)

Replacement feet for the Marantz 6350 turntable. Set of 2: two printed housings + two printed bushings. The 6350 stands on four spring-loaded feet (leg + spring, fixed with a screw). This is a new leg housing with its inner bushing, printed in PETG, for feet that are cracked or missing. Replace one foot and keep a spare, or replace two. For all four feet, order two sets. FITS: Marantz 6350 (standard model). Not confirmed for the 6350Q, 6300 or other models. Please compare with your original foot before ordering. NOT INCLUDED: the springs and mounting screws. Reuse them from your old feet. Spring groove 24/34 mm diameter, 9 mm deep. Screw hole 6 mm; screw-head seat 14 mm inside the bushing. SIZE (each foot): housing 50.8 mm dia. x 16.0 mm high, bore 20 mm (18 mm at the top). Bushing 19 mm flange, 17 mm body, 14 mm long. INSTALLATION 1. Remove the old foot (screw from below). 2. Insert the bushing into the housing from the bottom, narrow end first. The flange stops inside; the narrow end comes out through the top hole. 3. Put the original spring in the groove. 4. Hold the foot under the turntable and drive the original screw up through the bushing into the base. Do not overtighten. MATERIAL: PETG, black, 3D printed (FDM). Layer lines are visible. Small support marks may remain inside the center hole and under the bushing flange; they do not affect the fit. NOTES: The fit dimensions follow a published design whose author fitted it to their own Marantz 6350. We have not test-fitted it ourselves. Load-bearing part, made for the turntable's own weight only. Images are CG renders. CREDIT: Outer shape of the foot: our own design. The bore, spring groove, boss and the bushing follow "Replacement Feet Marantz Model 6350" by daf46 (thingiverse.com/thing:2716677, CC BY 4.0), re-modelled by us. Not endorsed by daf46. Aftermarket part, not made by or affiliated with Marantz.